Publication/Research Library
Tang J, Bader D, Parker D, Forghany S, Nester C, Moser D and Jiang L (2023) Evaluation of in-shoe plantar pressure and shear during walking for diabetic foot ulcer prevention. Journal of Wound Care. 32(9): 597
Devin K, Tang J, Moser D and Jiang L (2023) Assessing Socket Fit Effects on Pressure and Shear at a Transtibial Residuum/Socket Interface. Applied Bionics and Biomechanics. Article ID: 3257059
Tang J, Bader D, Moser D, Parker D, Forghany S, et al., (2023) A Wearable Insole System to Measure Plantar Pressure and Shear for People with Diabetes. Sensors. 23(6): 3126
Tang J, Jiang L, McGrath M, Bader D, Laszczak P, et al., (2022) Analysis of lower limb prosthetic socket interface based on stress and motion measurements. Journal of Engineering in Medicine. 236(9): 1349
Devin K, Tang J, Moser D and Jiang L (2022) Biomechanical interaction at a transtibial residuum/socket interface during ambulation. Gait & Posture. 97(S1), 358
McGrath M, Davis K, Gallego A, Laszczak P, Tang J, et al., (2021). Using a sweating residuum/socket interface simulator for the evaluation of sweat management liners in lower limb prosthetics. Canadian Prosthetics and Orthotics Journal. 4(1): 35213.
Tang J, McGrath M, Hale N, Jiang L, Bader D, et al., (2018) A combined kinematic and kinetic analysis at the residuum/socket interface of a knee-disarticulation amputee. Medical Engineering & Physics. 49: 131
Hale N, Valero M, Tang J, Moser D, Jiang L (2018). A preliminary study on characterisation of finger interface kinetics using a pressure and shear sensor system. Prosthetics and Orthotics International, 42(1), 60
Tang J, McGrath M, Hale N, Jiang L, Bader D, et al., (2017) A combined kinematic and kinetic analysis at the residuum/socket interface of a knee-disarticulation amputee. Medical Engineering & Physics. 49: 131
McGrath M, Gao M, Tang J, Laszczak P, Jiang L, et al., (2017). Development of a residuum/socket interface simulator for lower limb prosthetics. Journal of Engineering in Medicine. 231(3): 235
Laszczak P, McGrath M, Tang J, Gao J, Jiang L, et al., (2016) A pressure and shear sensor system for stress measurement at lower limb residuum/socket interface. Medical Engineering & Physics. 38(7): 695
Valero M, Hale N, Tang J, Jiang L, McGrath M, et al., (2016) Interfacial pressure and shear sensor system for fingertip contact applications. Healthcare Technology Letters. 3(4): 280
Tang J, McGrath M, Hale N, Jiang L, Bader D, et al., (2016) Assessing trans-femoral residuum/socket interface coupling using 3D motion capture – Effect of terrains and walking speeds. Gait & Posture. 49(S2): 147
Tang J, McGrath M, Laszczak P, Jiang L, Bader D, Moser D, Zahedi S (2015) Characterisation of dynamic couplings at lower limb residuum/socket interface using 3D motion capture. Medical Engineering & Physics. 37(12): 161
Laszczak P, Jiang L, Bader D, Moser D and Zahedi S. (2015) Development and validation of a 3D-printed interfacial stress sensor for prosthetic applications. Medical Engineering & Physics, 37, (1),132
- Selected as editor’s choice for Medical Engineering and Physics (vol. 37/1)
- Awarded William James prize by the Institute of Engineering and Technology
- Selected as pick of the month by the Institute of Physics and Engineering in Medicine
Tang J, McGrath M, Laszczak P, Jiang L, Bader D, Moser D, Zahedi S (2015) Characterisation of dynamic couplings at lower limb residuum/socket interface using 3D motion capture. Medical Engineering & Physics. 37(12): 161